single shaft flexkit
 
SINGLE SHAFT FLEXKIT
These fully flashed skylight kits provide everything you need to bring natural light into your living environment and are ideal for the handyman and tradesman alike. Kits are AVAILABLE FOR MOST ROOF TYPES and come complete with :
  • acrylic opal dome fixed to a fully flashed metal base
  • diffuser (eggcrate for vented; prismatic for non-vented model)
  • highly reflective, u.v. resistant reinforced flexilight skylight shaft
  • white ceiling trim

INSTALLATION  
Install skylights into roof at desired position.

Cut opening in ceiling taking care not to
damage electrical wiring, plumbing etc.

Open flexible shaft kit and separate ceiling
trim assembly from other components.

Install ceiling trim assembly into ceiling.
Fix by screwing through sides into trimmers
or battens. (Pack between ceiling trim side
and framing if required, this ensuring when
screws are tightened the trim assembly is
not distorted.)

From within ceiling space, hold shaft gripper
and springing sides inwards, insert through
skylight such that the hooked portion at top
engages over lip of skylight base.

Pull shafting taut without overstretching
and trim to length.

Fold out tabs and pull shaft over trim assembly
to allow tabs to bite into shaft.


SELECTION CHART

SIZE LIGHT AREA (M2) STANDARD VENT AREA (M2) BCA VENT AREA (M2)
500 X 500 0.25 0.08 0.20
500 X 800 0.40 0.11 0.24
500 X 1200 0.60 0.14 0.31
600 X 600 0.36 0.10 0.27
600 X 1200 0.72 0.15 0.32
800 X 800 0.64 0.13 0.29


TOP PRINT PAGE HOME
The product described herein is protected by one or more of the following:
Australian Patent Nos 688444, 686419 and 712432:
Australian Registered Design Nos 127024, 118780 and 107995.

The skylight system illustrations contained in this brochure are the sole property of Regent Skylight Systems Pty. Ltd. and are reserved under copyright law. It is the responsibility of the user to ensure that the selected skylight system complies with the relevant building codes and authorities requirements. Regent Skylight Systems Pty. Ltd. reserves the right to improve or modify the skylight systems at any time.

Zincalume® and Colorbond® are registered trademarks of BHP Steel (JLA) Pty Ltd. Corrolux® is a registered trademark of Thomas Deutsch (Regent Sheet Metal Pty Ltd)